When moving into your new home, or even if you’ve been living in a place for a while, deciding to switch from the traditional water heater to the tankless water heater is a good move. You may not be aware of the difference between the two, or how one is more perfect for use than the other, but you will find out soon enough. When using large machines such as washing machines, the traditional water heaters may not be enough to provide the hot water you need when you need it, which will result in delay and further waste of time.

Tankless water heaters supply on demand, which means unlike the traditional type, they do not store hot water in them. Through a modern and well-developed technology, they make hot water when you need it, thus saving a lot of energy. There are two types of the tankless water heaters: the point-of-use heaters and the whole-house heaters.

small tankless water heater for shower

Both types have the propane (natural gas) and electric models.

The point-of-use tankless water heater is usually smaller in size than that which supplies the whole house with hot water. They are also relatively cheap and will fit just anywhere you want them- in a cabinet, under the sink, attached you a shower, etc. When using a point-of-use water heater, it is essential that you have a larger one that supplies the whole house with water, as this works best as a backup to your major water heater.

The major usage of tankless water heater depends majorly on how, when, and where you want to use it. It is installed when you’re not getting the water at the rate you want it. It is a typical boost. We’ll be viewing a few major locations where the point-of-use water heater is used.

1. Washing machine

When using large washing machines that take a lot of water, you would discover that when using your normal whole-house heater or traditional water heater, the time it takes for the hot water to hit your clothes is a bit lengthy. Everyone wants to make their home appliances work faster and be more efficient. Using your washing machine to do laundry twice a week will result in the use of over 5000 gallons a year of water, and this is only for the average clothes of an individual. The point-of-use water heater helps manage the amount of water to be used during washing by giving you hot water only when you need it.

2. On roads

The point-of-use water heater can be used on the road during the winter periods, to clear the solid snow off the road. You do not require a traditional water heater to apply to major or minor roads. The mini tankless water heater is connected to a water source and then the resulting hot water is passed through pipes to melt the ice.

3. Kitchens

The point-of-use water heater can be placed underneath the sink in the kitchen and connected to the valves and faucet to enable eater supply whenever necessary. The kitchen is one of the places where this water-heater is used. In small restaurants and shops that require hit water, it is impractical to make use of whole-house water heaters to supply a faucet or two with hot water. The faucets in kitchens of larger houses should have a direct connection to the heater supplying the whole house. The point-of-use heater is only used to support the major one. If using geothermal heaters, the point-of-use water heater isn’t enough to support the entire place if the heaters get faulty.

4. Showers

The point-of-use heater can be connected directly to the shower in bathrooms. This is one of the places where this water heater is most widely used.

The point-of-use tankless water heater can be used in various situations and locations. The major benefits are

  1. Rapid supply of hot water when needed.
  2. Energy efficient- It is a better energy saver compared to the traditional water heater.
  3. No heat loss: In the traditional heater, heat is lost in the tank where the water is stored. Since the point-of-use heater is tankless, there is no heat loss.
  4. Supports the major water heating system in case of a breakdown